How Much Does Paving Cost Per Square Metre? 2026
Planning to pave your Perth driveway, patio, or entertaining area? Whether you’re in Baldivis, Ellenbrook, or coastal Cottesloe, understanding paving costs helps you budget accurately and avoid expensive surprises. So, how much does paving cost in Perth? Prices vary according to materials used, side soil conditions, access and/or design sophistication. Knowing what local rates are realistic keeps you from running out of money and getting hit with surprises later on. The 2026 pricing gives an early indication of what fees you may be looking at in each area across Perth. Here’s a quick breakdown:
- Concrete pavers: $75–$150/m²
- Brick pavers: $70–$100/m²
- Limestone pavers: $45–$90/m²
- Natural stone: $75–$100/m²
- Asphalt driveway: $25–$100 per square metre
- Bitumen driveway (hot-mix asphalt): $25–$65 per square metre
- Labour: $25–$70/m² (depending on complexity)
- Site preparation: $30–$40/m² (compaction, sand, levelling)
- Average complete driveway: $6,000–$13,500
- Average patio (50m²): $4,500–$9,000
This Perth-specific guide uncovers real prices for paving, shedding light on the extras such as site preparation, draining, permits and sealing that most people don’t find out upfront.
Understanding Perth Paving Costs Per Square Metre
Pricing for paving in Perth is typically done by the square metre and includes labour costs. This could make it easier to compare quotes, although the actual final cost will depend on paver type, site conditions and access.
- Paving Cost Per m²: Material plus Labour
- Perth average: $70–$170/m² complete installation
- Materials only: $45–$100/m²
- Labour only: $25–$70/m²
Cost Breakdown Example – 50m² Patio
Budget Option (Brick)
Materials: 50m² × $70 = $3,500
Labour: 50m² × $30 = $1,500
Total: $5,000
Standard Option (Concrete)
Materials: 50m² × $75 = $3,750
Labour: 50m² × $40 = $2,000
Total: $5,750
Premium Option (Limestone)
Materials: 50m² × $65 = $3,250
Labour: 50m² × $50 = $2,500
Total: $5,750
What Affects Paving Costs
- Material selection is what ultimately determines most of the project’s cost.
- The larger the project, the cheaper it is per square metre.
- If an excavation is necessary, site preparation increases cost.
- Sandy soil in Perth means groundwork costs are often cheaper.
- Labour costs may be higher if the access is tight or challenging.
- Drainage necessities could add to the overall cost.
Houses in Kalamunda and the Perth Hills might require additional groundwork to account for rockier terrain. That can significantly increase the pavers price.
Need experts for paving Perth? Contact our team at Boda Building Group.
Complete Perth Paving Cost Breakdown by Material
Whatever paving material you use is the biggest decision. It has the most impact on cost. Here is a material-by-material guide, with real-world local prices.
Concrete Paver Costs Perth
Average Cost: $75–$150 per m²
The strength and low price of concrete slabs have made them the most popular surface choice for Perth homes. They work well in the hot summers and are replaceable individually if needed.
| Concrete Type | Cost Per m² | Lifespan | Best For |
| Standard grey | $75–$120 | 25–30 years | Budget driveways, pathways |
| Coloured concrete | $85–$140 | 25–30 years | Patios, decorative areas |
| Exposed aggregate | $100–$150 | 30+ years | Driveways, pool areas |
| Stamped concrete | $100–$150 | 30+ years | Feature areas |
Real Perth Example – Calculation
PROJECT: Concrete driveway, Baldivis – 40m²
- Concrete pavers: 40m² × $75 = $3,000
- Bedding sand: 2m³ × $45 = $90
- Road base: 3m³ × $55 = $165
- Edge restraints = $180
- Labour: 3 days × $480 = $1,440
- Site preparation = $400
TOTAL: $5,275 ($132/m²)
Timeline: 4 days
Brick Paver Costs Perth
Average brick pavement cost: $70–$100 per m²
Brick pavers provide a classic appearance that is perfect for old as well as new homes in Perth. The brick paving cost per m2 seems well-justified. The material is highly resilient and can be used for decades with low maintenance.
Need estimates for a specific project? Contact the best Perth bricklayers for a free quote.
| Brick Type | Cost Per m² | Lifespan | Best For |
| Clay pavers | $70–$90 | 50–100 years | Heritage homes |
| Concrete bricks | $65–$80 | 30–40 years | Budget patios |
| Recycled bricks | $50–$70 | 50+ years | Feature areas |
Real Perth Example – Calculation
PROJECT: Brick patio, Mount Lawley – 30m²
- Clay pavers: 33m² × $80 = $2,640
- Bedding sand = $75
- Road base = $125
- Jointing sand = $45
- Labour: 4 days × $500 = $2,000
- Sealing: 30m² × $8 = $240
TOTAL: $5,125 ($171/m²)
Timeline: 5 days
Limestone Paver Costs Perth
Average Cost: $45–$90 per m²
Limestone is a Perth staple, being light in colour and naturally cool. Homeowners love it for its laid-back, coastal vibes that complement local architecture.
| Finish | Cost Per m² | Lifespan | Best For |
| Natural split | $45–$65 | 25–30 years | Paths |
| Honed | $50–$70 | 30 years | Alfresco |
| Tumbled | $55–$75 | 30 years | Coastal homes |
| Bullnose | $15–$40/lm | 30 years | Pool edges |
Real Perth Example – Calculation
PROJECT: Limestone alfresco, Scarborough – 35m²
- Limestone pavers: 38m² × $60 = $2,280
- Bedding materials = $190
- Edge capping: 10m × $25 = $250
- Labour: 4 days × $520 = $2,080
- Sealing: 35m² × $10 = $350
TOTAL: $5,150 ($147/m²)
Timeline: 5 days
Natural Stone & Premium Pavers
Average Cost: $75–$100+ per m²
Natural stone delivers a high-end finish that cannot be matched by manufactured products. These materials are ideal for Perth pool areas and luxury outdoor spaces. You will mostly find these in hotels and resorts.
Looking for paving experts to work on a commercial construction project? Get in touch with us now.
| Stone | Cost Per m² | Lifespan | Best For |
| Granite | $75–$100 | 40+ years | Driveways |
| Travertine | $80–$120 | 30+ years | Pools |
| Sandstone | $65–$95 | 25+ years | Paths |
| Bluestone | $85–$110 | 40+ years | Patios |
| Flagstone | $75–$100 | 30+ years | Features |
Real Perth Example – Calculation
PROJECT: Travertine pool area, Cottesloe – 45m²
- Travertine pavers: 48m² × $95 = $4,560
- Bedding = $220
- Drainage falls = $320
- Labour: 5 days × $560 = $2,800
- Sealing: 45m² × $9 = $405
TOTAL: $8,305 ($184/m²)
Timeline: 6 days
Asphalt Driveway Costs Perth
Average Cost: $25–$100 per m²
Asphalt is a practical and fast solution for Perth driveways and larger parking areas. The smooth finish suits modern homes and handles heavy traffic well.
If you ever need to look for “asphalt maintenance near me in Perth” Boda Building Group can help.
| Grade | Asphalt Cost Per m² | Lifespan | Best For |
| Standard | $25–$60 | 15–20 years | Homes |
| Heavy-duty | $60–$80 | 20+ years | Multi-car |
| Decorative | $70–$100 | 20 years | Modern |
Real Perth Example – Calculation
PROJECT: Asphalt driveway, Ellenbrook – 60m²
- Asphalt supply & lay: 60m² × $45 = $2,700
- Base preparation = $850
- Concrete edging = $320
TOTAL: $3,870 ($64/m²)
Timeline: 2 days
Bitumen Driveway Costs Perth
Average bitumen driveway cost per m2: $25–$65 per m²
Bitumen remains one of the most economical surfacing options for long Perth driveways. It is especially suitable for semi-rural suburbs and sloping blocks.
| Type | Cost Per m² | Lifespan | Best For |
| Basic | $25–$45 | 12–15 years | Rural |
| Reinforced | $40–$55 | 15–18 years | Slopes |
| Heavy grade | $50–$65 | 18+ years | Commercial |
Real Perth Example – Calculation
PROJECT: Bitumen drive, Roleystone – 90m²
- Bitumen lay: 90m² × $38 = $3,420
- Base preparation = $1,100
- Drainage channel = $260
TOTAL: $4,780 ($53/m²)
Timeline: 2–3 days
Paving Costs by Project Type
Perth Paving prices vary enormously, as it greatly depends on what the area will be used for and how much strength is involved. Knowing the paving cost Perth based on project type allows you to plan a realistic budget for your particular outdoor space.
Driveway Paving Costs Perth
Concrete driveway prices Perth vary because of the material, type and size of the area they need to cover. The ultimate price to pave driveways is determined by the size of the driveway, ground preparation and whether or not it needs to support heavy vehicles.
Total Average Cost: $6,000–$13,500 (complete installation)
Standard Driveway Sizing
- Single car: 20–30m² → $3,000–$7,500
- Double car: 40–50m² → $6,000–$11,000
- Extra-wide or long: 60–80m² → $9,000–$16,000
Cost Factors
- Slope: The driveway pavement cost is higher on slopes because they require extra drainage and retaining work.
- Weight of the vehicle: If they are heavy, you will need a thicker base and it will cost about $15–$25/m² more.
- Turning areas: A circular or curved driveway paving cost in Perth can be 20 to 30% more.
Perth Council Requirements
Most Perth councils do not need permits for residential driveways below 200m², but homeowners should confirm local crossover rules and verge by-laws before starting.
Want to embark on a residential construction project with a team that knows how to abide by the laws and council regulations? Speak to our team now.
Patio & Alfresco Paving Costs
Patio paving prices will generally start at $80 and can go up to $200 per square metre. These spaces are typically for socialising and decorative in nature. They are not built with heavy structural loads in mind.
Average Cost: $4,500–$9,000 for a standard 50m² patio
Popular Perth Patio Sizes
- Small (20–30m²): $2,500–$5,500
- Medium (40–60m²): $5,000–$10,000
- Large (80–100m²): $9,000–$16,000
Why Patios Are Cheaper Than Driveways
- Thinner base need
- Some homes already have a concrete slab in place
- They require less excavation and removal of earth
Pathway & Garden Paving
Perth garden paths that are concrete-based tend to come in between $45 and $110+ per square metre. It is one of the low cost outdoor paving options. Costs can remain low as pathways are tight, with much less base depth.
Average Cost: $1,500–$4,000 for a typical garden path
Common Pathway Dimensions
- 1m wide × 10m long = 10m² → $1,200–$2,200
- 1.2m wide × 15m long = 18m² → $2,000–$3,600
Design Options
- Stepping stones with gravel infill
- Continuous paved path
- Composite materials such as pavers with timber edging
Pool Area Paving Perth
A pool surround in Perth will typically cost between $40 and $100+ a square metre, with materials chosen according to the considerations of safety and comfort in hot weather. These zones need to be well-organised for water flow and to prevent slippage.
Average Cost: $5,000–$12,000 for a complete pool surround
Essential Features
- Non-slip surface: Mandatory for safety around water
- Cool underfoot: Travertine or textured limestone performs best
- Drainage: Surface must slope away from the pool
- Coping: Professional pool edge finishing
Average Pool Surround Size
- 40–50m² → $6,000–$10,000
Planning home renovations Perth? Get in touch with our team to get cost estimates for paving different corners of your home.
How to Pave in Perth WA
Perth paving demands a consistent process to combat sandy soil, hot summers and winter rainfall. Installing it correctly is also essential so that your surface is flat, drains well, and won’t settle or crack over time. Here are the steps to follow:
- Calculate the size and design with appropriate fall for drainage.
- Excavate the old grass, soil or paving.
- Dig to the depth required by your project type.
- Lay and compact road base in two layers.
- Add and level bedding sand.
- Place pavers according to the pattern you’ve selected.
- Trim and cut pavers to fit edges and corners.
- Use edge restraints to secure the surface.
- Compact the finished paving.
- Use paving sand to fill the joints and seal if necessary.
Hidden Costs Most Perth Homeowners Don’t Expect
Many Perth paving quotes only show a simple per square metre rate and leave out important extras. These hidden items can add thousands to the final bill, especially on older properties, sloping blocks, or homes requiring drainage upgrades.
| Category | Item | Typical Cost | Notes |
| Excavation & Removal | Removing existing paving | $15–$35/m² | The repave driveway cost rises with reinforced concrete |
| Removing grass or soil | $10–$20/m² | Roots and rubble increase labour | |
| Green waste disposal | $150–$400 | Depends on skip size and weight | |
| Concrete removal | $25–$45/m² | Jackhammer and truck charges apply | |
| Ground Levelling | Minor levelling | $300–$800 | Small dips and uneven sections |
| Significant slopes | $800–$2,000 | May need retaining or terracing | |
| Compaction equipment hire | $150–$350/day | Required for stable base | |
| Base Materials | Road base (100–150mm, 50m²) | $1,500–$2,200 | Thickness varies by load type |
| Bedding sand (40mm, 50m²) | $200–$400 | Creates level laying surface | |
| Geotextile fabric | $150–$300 | Stops soil movement under pavers | |
| Drainage Systems | Ag pipe installation | $200–$500 | Disperses underground water |
| French drains | $400–$800 | Ideal for soggy Perth winters | |
| Channel drains | $300–$600 | Used along garages and patios | |
| Drainage pits | $250–$500 | Connects to stormwater system | |
| Permits & Council | Driveways over 200m² | $200–$400 | Size-based approval rules |
| Crossover permits | $300–$600 | Needed for verge changes | |
| Verge work permits | $150–$350 | Protects council land | |
| Stormwater connection | $400–$800 | Required in some suburbs | |
| Finishing Costs | Sealing | $5–$15/m² | Protects from stains and salt |
| Edge restraints | $8–$15 per lm | Prevents paver movement | |
| Decorative borders | $20–$40/m² | Feature banding or contrasts | |
| Joints/polymeric sand | $3–$8/m² | Locks pavers in place | |
| Cutting and trimming | $15–$30/m² | Higher for curves and angles |
At Boda Building Group, we offer transparent pricing with all expenses mentioned upfront. Contact our home builder Perth for a free estimate now.
Conclusion
Paving in Perth is an investment that enhances value and functionality as well as the aesthetic character of your property when executed with the right materials and preparation. It helps to know about cost, drainage requirements, and your options when it comes to installing paving around your Perth home. Ready to revamp your Perth property with exceptional paving? Boda Building Group are the paving experts in Perth, working with brick, concrete, limestone and natural stone pavers to provide a full service from site preparation through to sealing. With 15 years of proven experience, licensed and insured professionals and free estimates for your projects, you will be in good hands.
